Fleeced Satin™ SUV CoverSelect Your Vehicle
- Product Reviews ( 11 )
The Fleeced Satin™ cover is an excellent value for those looking for an indoor protection solution. A super soft, white fleece finish inner lining is combined with a durable woven polyester shell that provides a gentle touch for fine finishes. The cover has a slight stretch for a more contoured fit, and the material is a bit lighter than our Form-Fit® material, with the result being a very nice mid-weight custom cover. This value packed cover also features:
- Custom made to fit your vehicle's exact specifications
- Durable woven polyester shell + Super soft white fleece lining
- Breathability of the cover helps prevent rot and mildew.
- Double overlapped, double-needle stitched seams
- Urethane elastic sewn into front and rear hems
- Indoor protection from dust, dirt, and scratches
- Mid-weight 4.7 oz. per square yard for an easy to handle cover
- Installs easily in under 1 minute
- Made in the USA
This fleeced satin cover is the best investment in a cover that I have ever made. The custom fit is just right and is soft with durable double stitched seams. Easy on and off makes this lightweight cover the best cover for the money spent.
This is my 3rd cover to purchase from you and I have not been disappointed with any of the previous covers. I am sure that I will love the Satin cover for my SUV as well.
I have a classic K5 Blazer that I have put a lot of sweat and blood turning it into a eye catcher. The Fleeced Satin cover is the go-to cover that I use on this sweetheart due to the lightweight fabric and perfect fit. I highly recommend this cover.
I have been really impressed with this custom fitting cover for my new Land Cruiser. It is made from much higher quality material than even I was expecting to receive. Great products coveranything!
I live in two places half the year and this cover is key to keeping my explorer in good clean shape while I am away. I have two of these and they are a must!
You get a good solid cover for your money spent. The quality exceed my expectations. For the money I received a great performing, high quality cover that is still lightweight enough to easily store away. Well worth the money.
I found this to be a great easy-to-use website and the ordering process was quick. I ordered the Fleeced sating cover for my SUB and I have no qualms with the cover. It is a custom fit and a well designed cover.
I use this cover for my 2012 Land Rover - it fits it nicely and the lightweight quality of material is perfect for me. It is easy to install and packs up nicely.
The product exceeded my expectations. I was concerned with the material that touches the paint of the car, but it is made of a nice soft fleece, and is doing a great job of protecting my car.
This cover is a solid fit and looks great! I wasn't expecting such a soft lining, which makes it really easy to install and store and helps protect my SUV from dings and scratches.
I was excited to find this cover for my Land Rover! The cover is a spot on custom fit and seems to be made from a very high quality outer material and plush fleece inner material. Sweet cover!
All orders over $50 ship for FREE within the contiguous United States and Canada via United Parcel Service (UPS) and usually arrive within 2-5 days. Shipments to Hawaii, Alaska, Virgin Islands, and Puerto Rico will be shipped via USPS and usually take 1-2 weeks to arrive. Any additional costs associated with shipping to these addresses will be reflected upon checkout. You will promptly receive a tracking code via email once your order has shipped. Express shipping options are available at an additional cost. The cost for expedited services will be reflected upon checkout.
While orders to Canada are eligible for FREE UPS Ground Shipping, Canadian customers are responsible for paying all duties, taxes, and brokerage fees imposed by the Canadian government upon receipt of shipment. These fees are not determined until the shipment crosses the border, therefore these charges are the responsibility of the recipient. Any returned shipments for failure to pay these duties, taxes, or brokerage fees will result in a 20% restocking fee minus any applicable return shipping costs. Please allow 5-7 days for delivery. Outside of Canadian orders, we are unable to ship internationally.
The front of the cover is marked by a tag, pattern number, or logo. If your cover is equipped with mirror pockets (custom-fit covers only), place the pockets over the side mirrors first. Secure the front of the cover around the vehicle's front bumper, then unroll the cover over the vehicle and secure the opposite end of the cover around the back bumper. Some vehicles have very sharp bumpers, hood ornaments or moldings. To help extend the life of your cover, we recommend reinforcing the inside of the cover at areas exposed to severe abrasion, using cloth-reinforced duct tape or vinyl tape.
Use the following procedure to remove the cover in about a minute:
- Ensure the cover is dry and free of debris to prevent mold or mildew
- Release both ends of the cover from under the bumpers
- Fold up both sides onto the top of the vehicle into a long strip approximately 2 feet wide
- Roll the cover from front to rear in 3 foot increments, or vice versa
Use care when installing the cover on a vehicle which has just been driven to be sure the material does not come in contact with hot exhaust pipes. Also, airborne pollutants may be deposited on the windows or paint while a vehicle is being driven or when parked uncovered. These deposits may become smeared and create a haze when the cover is used. The haze can be wiped off with a damp cloth or washed off with water.
If your cover does not come with an antenna pocket sewn into the cover and your vehicle has an outside radio antenna which will not retract flush with the vehicle body, you will have to create an opening in the cover. We have included a non-corrosive plastic grommet set to reinforce the antenna opening. To make the most accurate antenna grommet opening, remove the antenna first and install the cover on the vehicle, making sure it is properly aligned and positioned. Using a sharp pencil, punch a hole through the fabric at the antenna location. Use sharp scissors to make the hole opening 3/4 inch in diameter. Place the cover on a clean hard surface, position the inside grommet through the opening you made and then snap the outside grommet in place using a rubber mallet. Do NOT use excessive force or the grommet can be damaged. Do NOT install the grommet with the cover on the vehicle.
Semi-custom and universal covers include an adhesive backed antenna patch that can be used instead of installing a grommet. After using a sharp pencil to punch a small hole through the fabric at the antenna location, simply place the adhesive backed patch over the newly created hole for additional reinforcement, and that's all there is to it.
Cleaning & Care
The performance of your cover can be affected by contaminant (dirt, dust, grease, etc.) build-up. Washing your cover correctly will help it maintain its water resistant properties and also increase the service life of your cover. Use the following procedure to clean the Fleeced Satin™ fabric:
- Place the cover in a large commercial front load washing machine
- Use mild powder detergent (dissolve first), NEVER use bleach or fabric softener
- Wash the cover using a gentle cycle with water temperature set to warm
- Rinse the cover twice (2x) with water only to remove all the cleaner
- Machine dry with medium temperature
Warranty & Returns
Our return & exchange policies are designed to give customers peace-of-mind on their cover purchase. The policies are in place to guarantee your satisfaction for the return and exchange period – if you are not satisfied with your purchase, contact our customer care center and we will address your concerns and work to correct them. Due to the wide variety of products and materials offered at Cover Anything, the policies may be different for each product. Please be sure to read and understand the return and/or exchange policies for the product you purchase.
Cover Anything guarantees that your Covercraft Fleeced Satin™ cover will arrive in new condition, be free of defects, and cover the vehicle for which it was ordered. However, due to the custom nature of the product, returns and exchanges are not possible. In the unlikely event of (1) a custom cover arriving damaged or defective, a warranty claim should be filed via the manufacturer's guidelines, or (2) size or fit issues, you will be directed to the manufacturer for resolution.
Fleeced Satin™ auto covers are protected by a 4 Year Limited Consumer Warranty. Cover Anything warrants, to the original purchaser, that the Fleeced Satin™ product is to be free from defects in material and workmanship for the prorated periods listed in the warranty details. Any Fleeced Satin™ cover deemed defective will be replaced on a prorated schedule based on the invoiced price of the product, not to include any shipping, handling, or any other fees. Retailer receipt or proof of purchase must be presented for any warranty transaction. Please keep your receipt and any tags removed from your product. The warranty is effective from the date of the initial retail purchase. Please review and understand all additional return, exchange, and/or warranty terms and conditions.