Fleeced Satin™ Truck Cover
Select Your Vehicle
Please Select a Model
- Overview
- Product Reviews ( 12 )
- FYI
Overview
The Fleeced Satin™ cover is an excellent value for those looking for an indoor protection solution. A super soft, white fleece finish inner lining is combined with a durable woven polyester shell that provides a gentle touch for fine finishes. The cover has a slight stretch for a more contoured fit, and the material is a bit lighter than our Form-Fit® material, with the result being a very nice mid-weight custom cover. This value packed cover also features:
- Custom made to fit your vehicle's exact specifications
- Durable woven polyester shell + Super soft white fleece lining
- Breathability of the cover helps prevent rot and mildew.
- Double overlapped, double-needle stitched seams
- Urethane elastic sewn into front and rear hems
- Indoor protection from dust, dirt, and scratches
- Mid-weight 4.7 oz. per square yard for an easy to handle cover
- Installs easily in under 1 minute
- Made in the USA
Product Reviews
I finally invested it the right cover! I purchased a Walmart cover long ago and it was difficult to use, not to mention poorly designed. I was told about this site, went on and purchased the Fleeced Satin cover - I am amazed at how well it is made and how easy it is to use. I don't know why it has taken me this long to replace the junk cover.
I really needed this cover and was stoked when it was delivered and I wasted no time installing it on my truck when it came in. The construction is high quality and I really love how well this cover goes on my truck. Thank you again!
I regularly take my truck around the state to car shows and this cover comes with me to every show. I like the way it fits over my truck smoothly and it is super easy to pack away. This cover is a must for any show vehicle.
This fleeced satin truck cover is a great custom fit for my truck and I like how the elastic on the front and back slip nicely around the corners of my truck. I would recommend this if you are looking to cover your garaged vehicle.
I have been very happy with my purchase of this Fleeced Satin cover. You get a great fitting and high quality cover with overlapped seams. In my opinion this is a top notch cover for the money.
This soft cover is a perfect custom fit for my truck. I had no problems with the installation and the mirror pockets were in the right spot. The construction is made from a high quality poly exterior and super soft inside that keeps dust out and paint fresh.
This is a great indoor cover and fits over my pickup just fine. In the last few months that I have been using it, It has been a great barrier against all the dust build up in my garage. When I removed the cover yesterday, my truck was just as clean as when i put the cover on.
My fleeced satin cover came in on the day expected and was effortless to put on. I bet it didn't take more than two minutes to get it over my truck and secured and with the soft inner I feel confident it will protect from scratches.
This is a nicely designed website BTW. I chose the lightweight fleeced satin cover for my truck due to the soft fleeced lining. I feel like that feature is very important to protect my truck's finish.
I review this product as a great overall cover for indoor use. I have been happy with how well it fits and accentuates the contours of my Chevy and I highly recommend this cover to others looking for a quality cover.
I am remodeling the house and have to live there at the same time. This cover has been key in ensuring that all the dust doesn't build up on the exterior and interior of my truck.
I have been in need of a good custom cover for my pick-up and this cover is exactly that. I rated it this way because I know there are higher, pricier covers out there but this is a quality indoor cover and is perfect for me.
FYI
Shipping Details
All orders over $50 ship for FREE within the contiguous United States and Canada via United Parcel Service (UPS) and usually arrive within 2-5 days. Shipments to Hawaii, Alaska, Virgin Islands, and Puerto Rico will be shipped via USPS and usually take 1-2 weeks to arrive. Any additional costs associated with shipping to these addresses will be reflected upon checkout. You will promptly receive a tracking code via email once your order has shipped. Express shipping options are available at an additional cost. The cost for expedited services will be reflected upon checkout.
While orders to Canada are eligible for FREE UPS Ground Shipping, Canadian customers are responsible for paying all duties, taxes, and brokerage fees imposed by the Canadian government upon receipt of shipment. These fees are not determined until the shipment crosses the border, therefore these charges are the responsibility of the recipient. Any returned shipments for failure to pay these duties, taxes, or brokerage fees will result in a 20% restocking fee minus any applicable return shipping costs. Please allow 5-7 days for delivery. Outside of Canadian orders, we are unable to ship internationally.
Installation
The front of the cover is marked by a tag, pattern number, or logo. If your cover is equipped with mirror pockets (custom-fit covers only), place the pockets over the side mirrors first. Secure the front of the cover around the vehicle's front bumper, then unroll the cover over the vehicle and secure the opposite end of the cover around the back bumper. Some vehicles have very sharp bumpers, hood ornaments or moldings. To help extend the life of your cover, we recommend reinforcing the inside of the cover at areas exposed to severe abrasion, using cloth-reinforced duct tape or vinyl tape.
Use the following procedure to remove the cover in about a minute:
- Ensure the cover is dry and free of debris to prevent mold or mildew
- Release both ends of the cover from under the bumpers
- Fold up both sides onto the top of the vehicle into a long strip approximately 2 feet wide
- Roll the cover from front to rear in 3 foot increments, or vice versa
Use care when installing the cover on a vehicle which has just been driven to be sure the material does not come in contact with hot exhaust pipes. Also, airborne pollutants may be deposited on the windows or paint while a vehicle is being driven or when parked uncovered. These deposits may become smeared and create a haze when the cover is used. The haze can be wiped off with a damp cloth or washed off with water.
If your cover does not come with an antenna pocket sewn into the cover and your vehicle has an outside radio antenna which will not retract flush with the vehicle body, you will have to create an opening in the cover. We have included a non-corrosive plastic grommet set to reinforce the antenna opening. To make the most accurate antenna grommet opening, remove the antenna first and install the cover on the vehicle, making sure it is properly aligned and positioned. Using a sharp pencil, punch a hole through the fabric at the antenna location. Use sharp scissors to make the hole opening 3/4 inch in diameter. Place the cover on a clean hard surface, position the inside grommet through the opening you made and then snap the outside grommet in place using a rubber mallet. Do NOT use excessive force or the grommet can be damaged. Do NOT install the grommet with the cover on the vehicle.
Semi-custom and universal covers include an adhesive backed antenna patch that can be used instead of installing a grommet. After using a sharp pencil to punch a small hole through the fabric at the antenna location, simply place the adhesive backed patch over the newly created hole for additional reinforcement, and that's all there is to it.
Cleaning & Care
The performance of your cover can be affected by contaminant (dirt, dust, grease, etc.) build-up. Washing your cover correctly will help it maintain its water resistant properties and also increase the service life of your cover. Use the following procedure to clean the Fleeced Satin™ fabric:
- Place the cover in a large commercial front load washing machine
- Use mild powder detergent (dissolve first), NEVER use bleach or fabric softener
- Wash the cover using a gentle cycle with water temperature set to warm
- Rinse the cover twice (2x) with water only to remove all the cleaner
- Machine dry with medium temperature
Warranty & Returns
Our return & exchange policies are designed to give customers peace-of-mind on their cover purchase. The policies are in place to guarantee your satisfaction for the return and exchange period – if you are not satisfied with your purchase, contact our customer care center and we will address your concerns and work to correct them. Due to the wide variety of products and materials offered at Cover Anything, the policies may be different for each product. Please be sure to read and understand the return and/or exchange policies for the product you purchase.
Cover Anything guarantees that your Covercraft Fleeced Satin™ cover will arrive in new condition, be free of defects, and cover the vehicle for which it was ordered. However, due to the custom nature of the product, returns and exchanges are not possible. In the unlikely event of (1) a custom cover arriving damaged or defective, a warranty claim should be filed via the manufacturer's guidelines, or (2) size or fit issues, you will be directed to the manufacturer for resolution.
Fleeced Satin™ auto covers are protected by a 4 Year Limited Consumer Warranty. Cover Anything warrants, to the original purchaser, that the Fleeced Satin™ product is to be free from defects in material and workmanship for the prorated periods listed in the warranty details. Any Fleeced Satin™ cover deemed defective will be replaced on a prorated schedule based on the invoiced price of the product, not to include any shipping, handling, or any other fees. Retailer receipt or proof of purchase must be presented for any warranty transaction. Please keep your receipt and any tags removed from your product. The warranty is effective from the date of the initial retail purchase. Please review and understand all additional return, exchange, and/or warranty terms and conditions.
