Evolution® SUV CoverSelect Your Vehicle
- Product Reviews ( 8 )
The Evolution® cover is designed to offer a custom fit cover at an affordable price for all auto enthusiasts. The material is a four layer non-woven fabric with the inner layer having a softer feel. The Evolution® cover provides great protection against dings, dust, and the sun's harmful rays and has good moisture resistance. Additional features include:
- Custom made to fit your vehicle's exact specifications
- One outer layer of bi-component spunbond + Two middle layers of melt blown fibers to filter airborne pollutants + Bi-component inner layer
- Breathability of the cover releases trapped heat and moisture, and helps prevent rot and mildew
- Double overlapped, double-needle stitched seams
- Urethane elastic sewn into front and rear hems
- Reinforced non-scratch tie down grommets for windy conditions or secure with our Cable Lock Kit
- Protects against airborne pollutants, bird droppings, tree sap, etc.
- UV resistant additives reduce fabric degradation
- Installs easily in under 1 minute
- Made in the USA
This is a grand product! I espeacially like the four layer construction and how that has provided protection against small dings and scratches. I have not had it long but so far it has been holding up nicely. Thank you
This cover looks very nice and fits good. I read the instructions that came with the cover and had no issues putting it on my Land Rover. The material itself has a soft interrior so I trust that it will keep my baby scratch free. Happy with my purchase.
The feel of this cover is phenomenal and i have found it to be very breathable with no moisture found when I took it off. Also it fits my Ford Edge great and has been easy to put on and take off.
I have been impressed with the fabric of this cover and and how well it fits. I had no issues installing the cover on my Explorer using the instructions and appreciate how well it safeguards against the elements.
Bought the Evolution SUV cover to go over my Subaru and was happy with the fit when I put it on and also with the cover's four layers and the double stitched seams . Well made cover!
This cover seems to be very well manufactured. The cover fits just the way that i had hoped it would! All in all I am glad that i purchased this cover and would happily recommend it.
This cover seems to be more than just water resistant. We had a rain storm come through and when I took it off I got completely soaked do to the pool of water that was held between my crossbars.
I bought this cover for my Jeep patriot and I have had it for a little over 8 months and it so far so good. This multiple layer care cover is just what I needed for and I have been pleased with the protection it has provided the last several months.
All orders over $50 ship for FREE within the contiguous United States and Canada via United Parcel Service (UPS) and usually arrive within 2-5 days. Shipments to Hawaii, Alaska, Virgin Islands, and Puerto Rico will be shipped via USPS and usually take 1-2 weeks to arrive. Any additional costs associated with shipping to these addresses will be reflected upon checkout. You will promptly receive a tracking code via email once your order has shipped. Express shipping options are available at an additional cost. The cost for expedited services will be reflected upon checkout.
While orders to Canada are eligible for FREE UPS Ground Shipping, Canadian customers are responsible for paying all duties, taxes, and brokerage fees imposed by the Canadian government upon receipt of shipment. These fees are not determined until the shipment crosses the border, therefore these charges are the responsibility of the recipient. Any returned shipments for failure to pay these duties, taxes, or brokerage fees will result in a 20% restocking fee minus any applicable return shipping costs. Please allow 5-7 days for delivery. Outside of Canadian orders, we are unable to ship internationally.
The front of the cover is marked by a tag, pattern number, or logo. If your cover is equipped with mirror pockets (custom-fit covers only), place the pockets over the side mirrors first. Secure the front of the cover around the vehicle's front bumper, then unroll the cover over the vehicle and secure the opposite end of the cover around the back bumper. Some vehicles have very sharp bumpers, hood ornaments or moldings. To help extend the life of your cover, we recommend reinforcing the inside of the cover at areas exposed to severe abrasion, using cloth-reinforced duct tape or vinyl tape.
Use the following procedure to remove the cover in about a minute:
- Ensure the cover is dry and free of debris to prevent mold or mildew
- Release both ends of the cover from under the bumpers
- Fold up both sides onto the top of the vehicle into a long strip approximately 2 feet wide
- Roll the cover from front to rear in 3 foot increments, or vice versa
Use care when installing the cover on a vehicle which has just been driven to be sure the material does not come in contact with hot exhaust pipes. Also, airborne pollutants may be deposited on the windows or paint while a vehicle is being driven or when parked uncovered. These deposits may become smeared and create a haze when the cover is used. The haze can be wiped off with a damp cloth or washed off with water.
If your cover does not come with an antenna pocket sewn into the cover and your vehicle has an outside radio antenna which will not retract flush with the vehicle body, you will have to create an opening in the cover. We have included a non-corrosive plastic grommet set to reinforce the antenna opening. To make the most accurate antenna grommet opening, remove the antenna first and install the cover on the vehicle, making sure it is properly aligned and positioned. Using a sharp pencil, punch a hole through the fabric at the antenna location. Use sharp scissors to make the hole opening 3/4 inch in diameter. Place the cover on a clean hard surface, position the inside grommet through the opening you made and then snap the outside grommet in place using a rubber mallet. Do NOT use excessive force or the grommet can be damaged. Do NOT install the grommet with the cover on the vehicle.
Semi-custom and universal covers include an adhesive backed antenna patch that can be used instead of installing a grommet. After using a sharp pencil to punch a small hole through the fabric at the antenna location, simply place the adhesive backed patch over the newly created hole for additional reinforcement, and that's all there is to it.
Cleaning & Care
The performance of your cover can be affected by contaminant (dirt, dust, grease, etc.) build-up. Washing your cover correctly will help it maintain its water resistant properties and also increase the service life of your cover. Use the following procedure to clean the Evolution® fabric:
- Place the cover in a large commercial front load washing machine
- Use Simple Green cleaner (dilute 1/4 cup in 1 cup of water), NEVER use bleach or fabric softener
- Wash the cover using a gentle cycle with water temperature set to cold
- Rinse the cover twice (2x) with water only to remove all the cleaner
- Air dry the cover
You may also clean your cover on a vehicle using the following procedure:
- Install your cover inside-out on the vehicle
- Mix one ounce (1oz) of Simple Green cleaner per quart of warm water
- Spray or sponge the mixture onto the cover
- Rinse thoroughly with plain water until there are no suds on the cover
- Air dry the cover
Warranty & Returns
Our return & exchange policies are designed to give customers peace-of-mind on their cover purchase. The policies are in place to guarantee your satisfaction for the return and exchange period – if you are not satisfied with your purchase, contact our customer care center and we will address your concerns and work to correct them. Due to the wide variety of products and materials offered at Cover Anything, the policies may be different for each product. Please be sure to read and understand the return and/or exchange policies for the product you purchase.
Cover Anything guarantees that your Covercraft Evolution® cover will arrive in new condition, be free of defects, and cover the vehicle for which it was ordered. However, due to the custom nature of the product, returns and exchanges are not possible. In the unlikely event of (1) a custom cover arriving damaged or defective, a warranty claim should be filed via the manufacturer's guidelines, or (2) size or fit issues, you will be directed to the manufacturer for resolution.
Evolution® auto covers are protected by a 6 Year Limited Consumer Warranty. Cover Anything warrants, to the original purchaser, that the Evolution® product is to be free from defects in material and workmanship for the prorated periods listed in the warranty details. Any Evolution® cover deemed defective will be replaced on a prorated schedule based on the invoiced price of the product, not to include any shipping, handling, or any other fees. Retailer receipt or proof of purchase must be presented for any warranty transaction. Please keep your receipt and any tags removed from your product. The warranty is effective from the date of the initial retail purchase. Please review and understand all additional return, exchange, and/or warranty terms and conditions.